Super coil universal kit-4cyl inductive 3ohms - Accel by: ACCEL. High-output coils for use in either 2- or 4-cylinder motorcycles. Motorcycles with point or electronically triggered ignitions use PART #140403 or #140403S. Bikes equipped with capacitive discharge ignition (CDI) use PART #140404 or #140404S. ACCEL engineers designed these coils' special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systems.Maximum performance with fast rise times. Extra-heavy-duty 8,8 mm silicone wires included NOTE: Using the wrong coil may damage your motorcycle's electronic ignition module. To determine your ignition type, complete the following test. Determine whether the type of coil you are replacing is a high tower coil. These coils will NOT replace single tower coils. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils. Turn the ignition on, but DO NOT engage the starter button. If there are 12V at the coil, the motorcycle has an inductive type ignition.
If there is no voltage at the coil, then the motorcycle has a CDI ignition because the power goes to the control box first. COLOR/FINISH: Yellow IGNITION TYPE: Electronic STYLE: External TYPE: Ignition UNITS: Kit PRODUCT NAME: Coil INPUT VOLTAGE: 12 V ELECTRICAL RESISTANCE: 3,0. 140403 CC ELECTRICAL SYSTEM GROUP - SCC IGNITION COIL GROUP - QE 1 - SSI - C 163.16. The item "Super coil universal kit-4cyl inductive 3ohms Accel" is in sale since Wednesday, July 11, 2018. This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Electrical & Ignition Parts\Ignition Coils".The seller is "dxmoto_uk" and is located in Las Rozas de Madrid. This item can be shipped worldwide.