ACCEL engineers designed these coils special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systems. Maximum performance with fast rise times. Extra-heavy-duty 9mm silicone wires included. NOTE: Using the wrong coil may damage your motorcycles electronic ignition module.
To determine your ignition type, complete the following test. Determine whether the type of coil you are replacing is a high tower coil. These coils will NOT replace single tower coils. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils.Turn the ignition on, but DO NOT engage the starter button. If there are 12V at the coil, the motorcycle has an inductive type ignition. If there is no voltage at the coil, then the motorcycle has a CDI ignition because. The power goes to the control box first. Primary Resistance is 3.0 Ohms.
The item "Super Coil Kit Inductive Discharge Accel 140403" is in sale since Saturday, January 28, 2017. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Ignition Coils". The seller is "jawzys" and is located in Hinckley, Ohio. This item can be shipped worldwide.