Accel Single Super Coil Kit For Universal Applications 3.0 Ohms Black- 140405K
Single Super Coil Kit for Universal Applications. High-output coils ACCEL engineers designed these coils special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systems Maximum performance with fast rise times Extra-heavy-duty 9 mm silicone wires included Made in the U. Using the wrong coil may damage your motorcycles electronic ignition module. To determine your ignition type, complete the following test: 1. Determine whether the type of coil you are replacing is a high tower coil. These coils will NOT replace single tower coils. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils. Turn the ignition on, but DO NOT engage the starter button. If there are 12V at the coil, the motorcycle has an inductive type ignition.
If there is no voltage at the coil, then the motorcycle has a CDI ignition because the power goes to the control box first. Ignition Type: Inductive discharge For 2-cylinder models One coil kit. Item Sells only ONE part, picture shows different angles.
The item "Accel Single Super Coil Kit For Universal Applications 3.0 Ohms Black- 140405K" is in sale since Wednesday, December 27, 2017. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Ignition Coils".
The seller is "qeautoparts1" and is located in Miami, Florida. This item can be shipped worldwide.
- Warranty: No Warranty
- Option: 3.0ohms - Black
- Brand: Accel
- Manufacturer Part Number: 140405K
- MPN: 140405K