Extra-heavy-duty 9mm silicone wires included. NOTE: Using the wrong coil may damage your motorcycles electronic ignition module.
To determine your ignition type, complete the following test. Determine whether the type of coil you are replacing is a high tower coil.
These coils will NOT replace single tower coils. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils. Turn the ignition on, but DO NOT engage the starter button. If there are 12V at the coil, the motorcycle has an inductive type ignition. If there is no voltage at the coil, then the motorcycle has a CDI ignition because.The power goes to the control box first. Primary Ristance is 3.0 Ohms.
Local pickups are no problem at all. We must be notified within 24 hours of receipt of any missing, defective or damaged goods.
The item "Accel 140403 Super Coil Kit Inductive Discharge 3 Ohm Ignition Coil 21-1664" is in sale since Friday, January 24, 2014. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Ignition Coils". The seller is "oemcycles" and is located in Loudon, Tennessee.
This item can be shipped worldwide.